Home > Articles > Cisco > Cisco Networking Academy

  • Print
  • + Share This
This chapter is from the book

IP Addressing Crisis and Solutions

This section discusses some of the restraints involved in using IPv4 addressing. It also discusses some of the various methods and solutions that can be used to help get the most out of the depleted IPv4 address pool, such as CIDR, VLSM, route aggregation, and supernetting.

IP Addressing Crisis

Class A and B addresses make up 75 percent of the IPv4 address space. However, a relative handful of organizations, fewer than 17,000, can be assigned a Class A or B network number. Class C network addresses are far more numerous than Class A and B addresses, although they account for only 12.5 percent of the possible 4 billion, or 232, IP hosts, as illustrated in Figure 2-6.

Figure 6Figure 2-6 IP Address Allocation

 

Unfortunately, Class C addresses are limited to 254 hosts, which will not meet the needs of larger organizations that cannot acquire a Class A or B address. Even if there were more Class A, B, and C addresses, too many network addresses would cause Internet routers to grind to a halt under the weight of enormous routing tables.

Ultimately, the classful system of IP addressing, even with subnetting, could not scale to effectively handle global demand for Internet connectivity. As early as 1992, the Internet Engineering Task Force (IETF) identified two specific concerns:

  • Exhaustion of the remaining, unassigned IPv4 network addresses. At the time, the Class B space was on the verge of depletion.

  • The rapid and substantial increase in the size of the Internet routing tables is because of the Internet's growth. As more Class C addresses came online, the resulting flood of new network information threatened the capability of Internet routers to cope effectively.

In the short term, the IETF decided that a retooled IPv4 would have to hold out long enough for engineers to design and deploy a completely new Internet Protocol. That new protocol, IPv6, solves the address crisis by using a 128-bit address space. After years of planning and development, IPv6 promises to be ready for wide-scale implementation. However, IPv6 continues, for the most part, to wait for that implementation.

One reason that IPv6 has not been rushed into service is that the short-term extensions to IPv4 have been so effective. By eliminating the rules of class, IPv4 now enjoys renewed viability.

Classless Interdomain Routing

Routers use a form of IPv4 addressing called Classless Interdomain Routing (CIDR) that ignores class.

CIDR was introduced in 1993 by RFCs 1517, 1518, 1519, and 1520. It was deployed in 1994. CIDR dramatically improves the scalability and efficiency of IPv4 by providing the following:

  • Replacement of classful addressing with a more flexible and less wasteful classless scheme

  • Enhanced route aggregation, also known as supernetting or summarization

  • Supernetting, which is the combination of contiguous network addresses into a new address defined by the subnet mask

The following sections describe route aggregation, supernetting, and address allocation in more detail.

Route Aggregation and Supernetting

CIDR allows routers to aggregate, or summarize, routing information. It does this by using a bit mask instead of an address class to determine the network portion of an address. This shrinks the size of the routing tables used by the router. In other words, just one address and mask combination can represent the routes to multiple networks.

Without CIDR and route aggregation, a router must maintain many individual entries for the routes within the same network, as opposed to one route for that particular network when using CIDR addressing.

The shaded entries in Table 2-2 identify the 16 bits that, based on the rules of class, represent the network number. Classful routers are forced to handle Class B networks using these 16 bits. Because the first 16 bits of each of these eight network numbers are unique, a classful router sees eight unique networks and must create a routing table entry for each. However, these eight networks do have common bits.

Table 2-2 Route Aggregation and Supernetting

Network Number

First Octet

Second Octet

Third Octet

Fourth Octet

172.24.0.0/16

10101100

00011000

00000000

00000000

172.25.0.0/16

10101100

00011001

00000000

00000000

172.26.0.0/16

10101100

00011010

00000000

00000000

172.27.0.0/16

10101100

00011011

00000000

00000000

172.28.0.0/16

10101100

00011100

00000000

00000000

172.29.0.0/16

10101100

00011101

00000000

00000000

172.30.0.0/16

10101100

00011110

00000000

00000000

172.31.0.0/16

10101100

00011111

00000000

00000000


Table 2-3 shows that the eight network addresses have the first 13 bits in common. A CIDR-compliant router can summarize routes to these eight networks by using a 13-bit prefix. Only these eight networks share these bits:

10101100 00011

Table 2-3 Dotted-Decimal Notation

Network Number

First Octet

Second Octet

Third Octet

Fourth Octet

172.24.0.0/16

10101100

00011000

00000000

00000000

172.25.0.0/16

10101100

00011001

00000000

00000000

172.26.0.0/16

10101100

00011010

00000000

00000000

172.27.0.0/16

10101100

00011011

00000000

00000000

172.28.0.0/16

10101100

00011100

00000000

00000000

172.29.0.0/16

10101100

00011101

00000000

00000000

172.30.0.0/16

10101100

00011110

00000000

00000000

172.31.0.0/16

10101100

00011111

00000000

00000000


To represent this prefix in decimal terms, the rest of the address is padded with 0s and then paired with a 13-bit subnet mask:

10101100 00011000 00000000 00000000 = 172.24.0.0
11111111 11111000 00000000 00000000 = 255.248.0.0

Therefore, a single address and mask define a classless prefix that summarizes routes to the eight networks, 172.24.0.0/13.

By using a prefix address to summarize routes, routing table entries can be kept more manageable. The following benefits are a result of the summarized routes:

  • More efficient routing

  • Reduced number of CPU cycles when recalculating a routing table or when sorting through the routing table entries to find a match

  • Reduced router memory requirements

Supernetting is the practice of using a bit mask to group multiple classful networks as a single network address. Supernetting and route aggregation are different names for the same process. However, the term supernetting is most often applied when the aggregated networks are under common administrative control. Supernetting takes bits from the network portion of the network mask, whereas subnetting takes bits from the host portion of the subnet mask. Supernetting and route aggregation are essentially the inverse of subnetting.

Recall that the Class A and Class B address space is almost exhausted, leaving large organizations little choice but to request multiple Class C network addresses from providers. If a company can acquire a block of contiguous Class C network addresses, supernetting can be used so that the addresses appear as a single large network, or supernet.

Supernetting and Address Allocation

Consider Company XYZ, which requires addresses for 400 hosts. Under the classful addressing system, XYZ could apply to a central Internet address authority for a Class B address. If the company got the Class B address and then used it to address one logical group of 400 hosts, tens of thousands of addresses would be wasted. A second option for XYZ would be to request two Class C network numbers, yielding 508, or 2 * 254, host addresses. The drawback of this approach is that XYZ would have to route between its own logical networks. Also, Internet routers would still need to maintain two routing table entries for the XYZ network, rather than just one.

Under a classless addressing system, supernetting allows XYZ to get the address space it needs without wasting addresses or increasing the size of routing tables unnecessarily. Using CIDR, XYZ asks for an address block from its Internet service provider (ISP), not a central authority, such as the Internet Assigned Numbers Authority (IANA). The ISP assesses XYZ's needs and allocates address space from its own large CIDR block of addresses. Providers assume the burden of managing address space in a classless system. With this system, Internet routers keep only one summary route, or supernet route, to the provider network. The provider keeps routes that are more specific to its customer networks. This method drastically reduces the size of Internet routing tables.

In the following example, XYZ receives two contiguous Class C addresses, 207.21.54.0 and 207.21.55.0. If you examine the shaded portions of Table 2-4, you will see that these network addresses have this common 23-bit prefix:

11001111 00010101 0011011

Table 2-4 Supernetting and Address Allocation

Network Number

First Octet

Second Octet

Third Octet

Fourth Octet

207.21.54.0

11001111

00010101

00110110

00000000

207.21.55.0

11001111

00010101

00110111

00000000


When the sample topology shown in Figure 2-7 is supernetted with a 23-bit mask, 207.21.54.0/23, the address space provides well over 400, or 29, host addresses without the tremendous waste of a Class B address. With the ISP acting as the addressing authority for a CIDR block of addresses, the ISP's customer networks, which include XYZ, can be advertised among Internet routers as a single supernet. The ISP manages a block of 256 Class C network addresses and advertises them to the world using a 16-bit prefix:

207.21.0.0/16

Figure 7Figure 2-7 Addressing with CIDR

 

When CIDR enabled ISPs to hierarchically distribute and manage blocks of contiguous addresses, IPv4 address space enjoyed the following benefits:

  • Efficient allocation of addresses

  • Reduced number of routing table entries

  • + Share This
  • 🔖 Save To Your Account

Pearson IT Certification Promotional Mailings & Special Offers

I would like to receive exclusive offers and hear about products from Pearson IT Certification and its family of brands. I can unsubscribe at any time.

Overview


Pearson Education, Inc., 221 River Street, Hoboken, New Jersey 07030, (Pearson) presents this site to provide information about Pearson IT Certification products and services that can be purchased through this site.

This privacy notice provides an overview of our commitment to privacy and describes how we collect, protect, use and share personal information collected through this site. Please note that other Pearson websites and online products and services have their own separate privacy policies.

Collection and Use of Information


To conduct business and deliver products and services, Pearson collects and uses personal information in several ways in connection with this site, including:

Questions and Inquiries

For inquiries and questions, we collect the inquiry or question, together with name, contact details (email address, phone number and mailing address) and any other additional information voluntarily submitted to us through a Contact Us form or an email. We use this information to address the inquiry and respond to the question.

Online Store

For orders and purchases placed through our online store on this site, we collect order details, name, institution name and address (if applicable), email address, phone number, shipping and billing addresses, credit/debit card information, shipping options and any instructions. We use this information to complete transactions, fulfill orders, communicate with individuals placing orders or visiting the online store, and for related purposes.

Surveys

Pearson may offer opportunities to provide feedback or participate in surveys, including surveys evaluating Pearson products, services or sites. Participation is voluntary. Pearson collects information requested in the survey questions and uses the information to evaluate, support, maintain and improve products, services or sites; develop new products and services; conduct educational research; and for other purposes specified in the survey.

Contests and Drawings

Occasionally, we may sponsor a contest or drawing. Participation is optional. Pearson collects name, contact information and other information specified on the entry form for the contest or drawing to conduct the contest or drawing. Pearson may collect additional personal information from the winners of a contest or drawing in order to award the prize and for tax reporting purposes, as required by law.

Newsletters

If you have elected to receive email newsletters or promotional mailings and special offers but want to unsubscribe, simply email information@informit.com.

Service Announcements

On rare occasions it is necessary to send out a strictly service related announcement. For instance, if our service is temporarily suspended for maintenance we might send users an email. Generally, users may not opt-out of these communications, though they can deactivate their account information. However, these communications are not promotional in nature.

Customer Service

We communicate with users on a regular basis to provide requested services and in regard to issues relating to their account we reply via email or phone in accordance with the users' wishes when a user submits their information through our Contact Us form.

Other Collection and Use of Information


Application and System Logs

Pearson automatically collects log data to help ensure the delivery, availability and security of this site. Log data may include technical information about how a user or visitor connected to this site, such as browser type, type of computer/device, operating system, internet service provider and IP address. We use this information for support purposes and to monitor the health of the site, identify problems, improve service, detect unauthorized access and fraudulent activity, prevent and respond to security incidents and appropriately scale computing resources.

Web Analytics

Pearson may use third party web trend analytical services, including Google Analytics, to collect visitor information, such as IP addresses, browser types, referring pages, pages visited and time spent on a particular site. While these analytical services collect and report information on an anonymous basis, they may use cookies to gather web trend information. The information gathered may enable Pearson (but not the third party web trend services) to link information with application and system log data. Pearson uses this information for system administration and to identify problems, improve service, detect unauthorized access and fraudulent activity, prevent and respond to security incidents, appropriately scale computing resources and otherwise support and deliver this site and its services.

Cookies and Related Technologies

This site uses cookies and similar technologies to personalize content, measure traffic patterns, control security, track use and access of information on this site, and provide interest-based messages and advertising. Users can manage and block the use of cookies through their browser. Disabling or blocking certain cookies may limit the functionality of this site.

Do Not Track

This site currently does not respond to Do Not Track signals.

Security


Pearson uses appropriate physical, administrative and technical security measures to protect personal information from unauthorized access, use and disclosure.

Children


This site is not directed to children under the age of 13.

Marketing


Pearson may send or direct marketing communications to users, provided that

  • Pearson will not use personal information collected or processed as a K-12 school service provider for the purpose of directed or targeted advertising.
  • Such marketing is consistent with applicable law and Pearson's legal obligations.
  • Pearson will not knowingly direct or send marketing communications to an individual who has expressed a preference not to receive marketing.
  • Where required by applicable law, express or implied consent to marketing exists and has not been withdrawn.

Pearson may provide personal information to a third party service provider on a restricted basis to provide marketing solely on behalf of Pearson or an affiliate or customer for whom Pearson is a service provider. Marketing preferences may be changed at any time.

Correcting/Updating Personal Information


If a user's personally identifiable information changes (such as your postal address or email address), we provide a way to correct or update that user's personal data provided to us. This can be done on the Account page. If a user no longer desires our service and desires to delete his or her account, please contact us at customer-service@informit.com and we will process the deletion of a user's account.

Choice/Opt-out


Users can always make an informed choice as to whether they should proceed with certain services offered by Adobe Press. If you choose to remove yourself from our mailing list(s) simply visit the following page and uncheck any communication you no longer want to receive: www.pearsonitcertification.com/u.aspx.

Sale of Personal Information


Pearson does not rent or sell personal information in exchange for any payment of money.

While Pearson does not sell personal information, as defined in Nevada law, Nevada residents may email a request for no sale of their personal information to NevadaDesignatedRequest@pearson.com.

Supplemental Privacy Statement for California Residents


California residents should read our Supplemental privacy statement for California residents in conjunction with this Privacy Notice. The Supplemental privacy statement for California residents explains Pearson's commitment to comply with California law and applies to personal information of California residents collected in connection with this site and the Services.

Sharing and Disclosure


Pearson may disclose personal information, as follows:

  • As required by law.
  • With the consent of the individual (or their parent, if the individual is a minor)
  • In response to a subpoena, court order or legal process, to the extent permitted or required by law
  • To protect the security and safety of individuals, data, assets and systems, consistent with applicable law
  • In connection the sale, joint venture or other transfer of some or all of its company or assets, subject to the provisions of this Privacy Notice
  • To investigate or address actual or suspected fraud or other illegal activities
  • To exercise its legal rights, including enforcement of the Terms of Use for this site or another contract
  • To affiliated Pearson companies and other companies and organizations who perform work for Pearson and are obligated to protect the privacy of personal information consistent with this Privacy Notice
  • To a school, organization, company or government agency, where Pearson collects or processes the personal information in a school setting or on behalf of such organization, company or government agency.

Links


This web site contains links to other sites. Please be aware that we are not responsible for the privacy practices of such other sites. We encourage our users to be aware when they leave our site and to read the privacy statements of each and every web site that collects Personal Information. This privacy statement applies solely to information collected by this web site.

Requests and Contact


Please contact us about this Privacy Notice or if you have any requests or questions relating to the privacy of your personal information.

Changes to this Privacy Notice


We may revise this Privacy Notice through an updated posting. We will identify the effective date of the revision in the posting. Often, updates are made to provide greater clarity or to comply with changes in regulatory requirements. If the updates involve material changes to the collection, protection, use or disclosure of Personal Information, Pearson will provide notice of the change through a conspicuous notice on this site or other appropriate way. Continued use of the site after the effective date of a posted revision evidences acceptance. Please contact us if you have questions or concerns about the Privacy Notice or any objection to any revisions.

Last Update: November 17, 2020