Home > Articles > Cisco > CCNP Collaboration

  • Print
  • + Share This
This chapter is from the book

Hunt Pilot

The hunt pilot is the number users call to reach CUC.

  1. Navigate to Call Routing, Route/Hunt, Hunt Pilot.
  2. Configure the hunt pilot number.
  3. Set the route partition.
  4. Enter a description
  5. Configure the hunt list; point the pilot number to the hunt list created previously.
  6. Set route options; use Default to route calls to CUC.
  7. Configure the outside dial tone.
  • + Share This
  • 🔖 Save To Your Account