Home > Articles > Cisco > CCNP Routing and Switching

  • Print
  • + Share This
This chapter is from the book

Practical Exercise 8-2: RFC 1483 Bridging over DSL

In this practical exercise, lab-827A and lab-827B are connected to the DSLAM and will be configured using RFC 1483 bridging, as shown in Figure 8-13. DSLAM and NSP configuration remain the same as in the previous exercise. For this exercise, you will assign the ATM interface of the CPEs and subinterfaces of the NRP to Bridge group 1. You will see the configuration output as well as some useful commands to verify the bridging configuration.

  • + Share This
  • 🔖 Save To Your Account