Home > Articles > Cisco > CCNP Routing and Switching

CCNP Self-Study: Understanding and Implementing Quality of Service in Cisco Multilayer Switched Networks

This chapter describes how QoS is an integral part of any multilayer switched network deployment. With QoS, you can build a network of predictable behavior for latency, jitter, and packet loss. In addition, QoS mitigates anomalous network behavior and provides for differentiation of traffic flows.
This chapter is from the book

This chapter covers the following topics:

Identifying Network Requirements and the Need for Quality of Service (QoS)

Understanding Why QoS Is Needed in Networks That Have Ample Bandwidth

Describing the IntServ and DiffServ QoS Architectures

Understanding the QoS Components: Classification, Marking, Traffic Conditioning, Congestion Management, and Congestion Avoidance

Applying QoS in Each Submodule of the Enterprise Composite Network Model

Introducing WAN QoS Features Such As Low-Latency Queuing (LLQ) and IP RTP Priority

Cisco Catalyst switches provide a wide range of QoS features that address the needs of voice, video, and data applications sharing a single infrastructure. Cisco Catalyst QoS technology lets you implement complex networks that predictably manage services to a variety of networked applications and traffic types.

Using the QoS features and services in Cisco IOS and Cisco CatOS software, you can design and implement networks that conform to either the Internet Engineering Task Force (IETF) integrated services (IntServ) model or the differentiated services (DiffServ) model. Cisco switches provide for differentiated services using QoS features such as classification and marking, traffic conditioning, congestion avoidance, and congestion management.

Table 10-1 indicates the predominant Catalyst switches at the time of publication. Each Catalyst switch supports each QoS component with specific restrictions and caveats. For brevity, this chapter focuses strictly on QoS using Cisco IOS. In addition, the examples, caveats, and restrictions discussed in this chapter involve the Catalyst 3550 and 6500 families of switches. Refer to the product-configuration guides or release notes on other Catalyst switches for the latest information regarding QoS-supported features and configurations. For information regarding Catalyst QoS using Cisco CatOS, refer to the configuration guides for those specific Catalyst switches on Cisco.com.

Table 10-1 Leading Catalyst Switches Applicable to This Chapter

Cisco IOS–Based Catalyst Switches

Catalyst 2940, 2950, 2955, 2970

Catalyst 3550, 3560, and 3750

Catalyst 4000 or 4500 with Supervisor II+, III, IV, or V

Catalyst 6500 with Supervisor Engine I with MSFC or MSFC2

Catalyst 6500 with Supervisor Engine II with MSFC2

Catalyst 6500 with Supervisor Engine 720 with MSFC3


Cisco IOS on routers and switches supports many QoS capabilities, including the following:

  • Control over resources—You have control over which network resources (bandwidth, equipment, wide-area facilities, and so on) are being used. For example, critical traffic such as voice, video, and data may consume a link with each type of traffic competing for link bandwidth. QoS helps to control the use of the resources (for example, dropping low-priority packets), thereby preventing low-priority traffic from monopolizing link bandwidth and affecting high-priority traffic such as voice traffic.

  • More efficient use of network resources—By using network analysis management and accounting tools, you can determine how traffic is handled, and which traffic experiences latency, jitter, and packet loss. If traffic is not handled optimally, you can use QoS features to adjust the switch behavior for specific traffic flows.

  • Tailored services—The control and visibility provided by QoS enables Internet service providers to offer carefully tailored grades of service differentiation to their customers. For example, a service provider can offer different SLAs for a customer website that receives 3000–4000 hits per day, compared to another customer site that receives only 200–300 hits per day.

  • Coexistence of mission-critical applications—QoS technologies make certain that mission-critical applications that are most important to a business receive the most efficient use of the network. Time-sensitive multimedia and voice applications require bandwidth and minimized delays, while other applications on a link receive fair service without interfering with mission-critical traffic.

This chapter discusses the preceding features with respect to Catalyst switches. This chapter begins with a discussion of the need for QoS in networks with sufficient bandwidth. It is a common misconception that QoS is not necessary in networks that have adequate bandwidth. Following that section, this chapter discusses QoS components and features that are available on Catalyst switches from the perspective of the Catalyst 6500 and 3550 families of switches. Later sections discuss recommendations for deploying the QoS components in different submodules of the Enterprise Composite Network Model. This chapter also includes a brief section on several WAN QoS features that are applicable to WAN interfaces on modules on Catalyst switches.

The Need for QoS

As introduced in the preceding section, even with adequate bandwidth available throughout a multilayer switched network, several network design properties may affect performance. The following network design properties may result in congestion even with networks of unlimited bandwidth; Figure 10-1 illustrates these network design properties.

Figure 1Figure 10-1 The Need for QoS

  • Ethernet speed mismatch—Network congestion may occur when different-speed network devices are communicating. For example, a Gigabit Ethernet–attached server sending traffic to a 100-Mbps Ethernet-attached server may result in congestion at the egress interface of the 100-Mbps Ethernet-attached server due to buffer limitations of the switch.

  • Many-to-one switching fabrics—Network congestion may occur when aggregating many-to-one switches. For example, when aggregating multiple access-layer switches into a distribution-layer switch, the sum of the switching fabric bandwidth of all access-layer switches generally exceeds the switch fabric capability of the distribution-layer switch.

  • Aggregation—Network congestion may occur when multiple Ethernet-attached devices are communicating over Ethernet through a single connection or to a single network device or server.

  • Anomalous behavior—Network congestion may occur because of anomalous behavior or events. Faulty hardware or software on any network device may cause a broadcast storm or other type of network storm yielding congestion on multiple interfaces. In this context, faulty software includes computer worms and viruses, which may cause packet storms that congest enterprises and even service provider networks. QoS can mitigate and control the behavior of the network during these types of anomalous events well enough that VoIP phone calls continue unaffected—even during an anomalous packet storm caused via an Internet worm—until the anomaly is resolved.

Congestion greatly affects the network availability and stability problem areas, but congestion is not the sole factor for these problem areas. All networks, including those without congestion, may experience the following three network availability and stability problems:

  • Delay (or latency)—The amount of time it takes for a packet to reach a destination.

  • Delay variation (or jitter)—The change in interpacket latency within a stream over time.

  • Packet loss—The measure of lost packets between any given source and destination.

NOTE

These factors are extremely crucial in deploying AVVID applications. Each network service places different expectations on the network. For example, VoIP applications require low latency and steady jitter factors, whereas storage protocols such as FCIP and iSCSI require very low packet loss but are less sensitive to jitter.

Latency, jitter, and packet loss may occur even in multilayer switched networks with adequate bandwidth. As a result, each multilayer switched network design needs to include QoS. A well-designed QoS architecture aids in preventing packet loss while minimizing latency and jitter. The following sections discuss these factors in more detail, as well as other benefits of QoS such as security and mitigating the effects of viruses and worms by using traffic conditioning.

Latency

End-to-end delay, or latency, between any given sender and receiver comprises two types of delay:

  • Fixed-network delay—Includes encoding and decoding time and the latency required for the electrical and optical signals to travel the media en route to the receiver. Generally, applying QoS does not affect fixed-network delay because fixed-network delay is a property of the medium. Upgrading to higher-speed media such as 10 Gigabit Ethernet and newer network hardware with lower encoding and decoding delays, depending on application, may result in lower fixed-network delay.

  • Variable-network delay—Refers to the network conditions, such as congestion, that affect the overall latency of a packet in transit from source to destination. Applying QoS does affect the variable-network delay.

In brief, the following list details the types of delay that induce end-to-end latency (note that the first four types of delay are fixed delay):

  • Packetization delay—Amount of time that it takes to segment, sample, and encode signals, process data, and turn the data into packets.

  • Serialization delay—Amount of time that it takes to place the bits of a packet, encapsulated in a frame, onto the physical media.

  • Propagation delay—Amount of time it takes to transmit the bits of a frame across the physical wire.

  • Processing delay—Amount of time it takes for a network device to take the frame from an input interface, place it into a receive queue, and place it into the output queue of the output interface.

  • Queuing delay—Amount of time a packet resides in the output queue of an interface.

Of all the delay types listed, queuing is the delay over which you have the most control with QoS features in Cisco IOS. The other types of delay are not directly affected by QoS configurations. For this reason, this chapter focuses mostly on queuing delay.

Jitter

Jitter is critical to network operation in maintaining consistent data rates. All end stations and Cisco network devices use jitter buffers to smooth out changes in arrival times of data packets that contain data, voice, and video. However, jitter buffers are only able to compensate for small changes in latency of arriving packets. If the arrival time of subsequent packets increases beyond a specific threshold, a jitter buffer underrun occurs. During jitter buffer exhaustion, there are no packets in the buffer to process for a specific stream. For example, if a jitter buffer underrun occurs while you are using an audio application to listen to an Internet radio station, the audio application stops playing music until additional packets arrive into the jitter buffer.

In contrast, when too many packets arrive too quickly, the jitter buffers may fill and be unable to handle any further traffic. This condition is called a buffer overrun. In this condition, for example, an audio application will skip parts of the audio file. This is a result of the audio player always having packets to play but missing several packets of the audio stream. With regards to VoIP phone calls, jitter buffer underruns and buffer overruns are usually intolerable, making the calling experience difficult.

Packet Loss

Packet loss is a serious issue in multilayer switched networks. Packet loss generally occurs on multilayer switches mainly when there is a physical-layer issue such as an Ethernet duplex mismatch or an interface output queue full condition. A common scenario for packet loss is when an output queue is full of packets to be transmitted where there is no additional memory space for additional ingress packets; this condition is commonly referred to as an output queue full condition. In this condition, the network device that is queuing the packets has no choice but to drop the packet. For example, an output queue full condition can occur where a sender attached to an interface of a higher speed is sending to a receiver attached to an interface of a lower speed. Eventually, the output queue buffers become full, resulting in dropped packets. A specific example of this behavior is where a server attached to a Catalyst switch at Gigabit Ethernet is transmitting to a client workstation attached at 100-Mbps Fast Ethernet. In this situation, when the server sends data at a sustained rate higher than 100 Mbps, the output queue for the workstation fills and eventually the switch drops egress frames. Several QoS options are available to apply deterministic behavior to the packet drops.

QoS-Enabled Solutions

In brief, QoS addresses latency, jitter, and packet-drop issues by supporting the following components and features on Cisco network devices:

  • Classifying and marking traffic such that network devices can differentiate traffic flows

  • Traffic conditioning to tailor traffic flows to specific traffic behavior and throughput

  • Marking traffic rates above specific thresholds as lower priority

  • Dropping packets when rates reach specific thresholds

  • Scheduling packets such that higher-priority packets transmit from output queues before lower-priority packets

  • Managing output queues such that lower-priority packets awaiting transmit do not monopolize buffer space

Applying QoS components and features to an enterprise or service provider network provides for deterministic traffic behavior. In other words, QoS-enabled infrastructures allow you to do the following:

  • Predict response times for end-to-end packet flows, I/O operations, data operations, transactions, etc.

  • Correctly manage and determine abilities of jitter-sensitive applications such as audio and video applications

  • Streamline delay-sensitive applications such as VoIP

  • Control packet loss during times of inevitable congestion

  • Configure traffic priorities across the entire network

  • Support applications or network requirements that entail dedicated bandwidth

  • Monitor and avoid network congestion

This chapter discusses in later sections how to apply QoS features to achieve deterministic traffic behavior on Catalyst switches. The next section discusses the two QoS service models that are the building blocks of any QoS implementation.

Pearson IT Certification Promotional Mailings & Special Offers

I would like to receive exclusive offers and hear about products from Pearson IT Certification and its family of brands. I can unsubscribe at any time.

Overview


Pearson Education, Inc., 221 River Street, Hoboken, New Jersey 07030, (Pearson) presents this site to provide information about Pearson IT Certification products and services that can be purchased through this site.

This privacy notice provides an overview of our commitment to privacy and describes how we collect, protect, use and share personal information collected through this site. Please note that other Pearson websites and online products and services have their own separate privacy policies.

Collection and Use of Information


To conduct business and deliver products and services, Pearson collects and uses personal information in several ways in connection with this site, including:

Questions and Inquiries

For inquiries and questions, we collect the inquiry or question, together with name, contact details (email address, phone number and mailing address) and any other additional information voluntarily submitted to us through a Contact Us form or an email. We use this information to address the inquiry and respond to the question.

Online Store

For orders and purchases placed through our online store on this site, we collect order details, name, institution name and address (if applicable), email address, phone number, shipping and billing addresses, credit/debit card information, shipping options and any instructions. We use this information to complete transactions, fulfill orders, communicate with individuals placing orders or visiting the online store, and for related purposes.

Surveys

Pearson may offer opportunities to provide feedback or participate in surveys, including surveys evaluating Pearson products, services or sites. Participation is voluntary. Pearson collects information requested in the survey questions and uses the information to evaluate, support, maintain and improve products, services or sites; develop new products and services; conduct educational research; and for other purposes specified in the survey.

Contests and Drawings

Occasionally, we may sponsor a contest or drawing. Participation is optional. Pearson collects name, contact information and other information specified on the entry form for the contest or drawing to conduct the contest or drawing. Pearson may collect additional personal information from the winners of a contest or drawing in order to award the prize and for tax reporting purposes, as required by law.

Newsletters

If you have elected to receive email newsletters or promotional mailings and special offers but want to unsubscribe, simply email information@informit.com.

Service Announcements

On rare occasions it is necessary to send out a strictly service related announcement. For instance, if our service is temporarily suspended for maintenance we might send users an email. Generally, users may not opt-out of these communications, though they can deactivate their account information. However, these communications are not promotional in nature.

Customer Service

We communicate with users on a regular basis to provide requested services and in regard to issues relating to their account we reply via email or phone in accordance with the users' wishes when a user submits their information through our Contact Us form.

Other Collection and Use of Information


Application and System Logs

Pearson automatically collects log data to help ensure the delivery, availability and security of this site. Log data may include technical information about how a user or visitor connected to this site, such as browser type, type of computer/device, operating system, internet service provider and IP address. We use this information for support purposes and to monitor the health of the site, identify problems, improve service, detect unauthorized access and fraudulent activity, prevent and respond to security incidents and appropriately scale computing resources.

Web Analytics

Pearson may use third party web trend analytical services, including Google Analytics, to collect visitor information, such as IP addresses, browser types, referring pages, pages visited and time spent on a particular site. While these analytical services collect and report information on an anonymous basis, they may use cookies to gather web trend information. The information gathered may enable Pearson (but not the third party web trend services) to link information with application and system log data. Pearson uses this information for system administration and to identify problems, improve service, detect unauthorized access and fraudulent activity, prevent and respond to security incidents, appropriately scale computing resources and otherwise support and deliver this site and its services.

Cookies and Related Technologies

This site uses cookies and similar technologies to personalize content, measure traffic patterns, control security, track use and access of information on this site, and provide interest-based messages and advertising. Users can manage and block the use of cookies through their browser. Disabling or blocking certain cookies may limit the functionality of this site.

Do Not Track

This site currently does not respond to Do Not Track signals.

Security


Pearson uses appropriate physical, administrative and technical security measures to protect personal information from unauthorized access, use and disclosure.

Children


This site is not directed to children under the age of 13.

Marketing


Pearson may send or direct marketing communications to users, provided that

  • Pearson will not use personal information collected or processed as a K-12 school service provider for the purpose of directed or targeted advertising.
  • Such marketing is consistent with applicable law and Pearson's legal obligations.
  • Pearson will not knowingly direct or send marketing communications to an individual who has expressed a preference not to receive marketing.
  • Where required by applicable law, express or implied consent to marketing exists and has not been withdrawn.

Pearson may provide personal information to a third party service provider on a restricted basis to provide marketing solely on behalf of Pearson or an affiliate or customer for whom Pearson is a service provider. Marketing preferences may be changed at any time.

Correcting/Updating Personal Information


If a user's personally identifiable information changes (such as your postal address or email address), we provide a way to correct or update that user's personal data provided to us. This can be done on the Account page. If a user no longer desires our service and desires to delete his or her account, please contact us at customer-service@informit.com and we will process the deletion of a user's account.

Choice/Opt-out


Users can always make an informed choice as to whether they should proceed with certain services offered by Adobe Press. If you choose to remove yourself from our mailing list(s) simply visit the following page and uncheck any communication you no longer want to receive: www.pearsonitcertification.com/u.aspx.

Sale of Personal Information


Pearson does not rent or sell personal information in exchange for any payment of money.

While Pearson does not sell personal information, as defined in Nevada law, Nevada residents may email a request for no sale of their personal information to NevadaDesignatedRequest@pearson.com.

Supplemental Privacy Statement for California Residents


California residents should read our Supplemental privacy statement for California residents in conjunction with this Privacy Notice. The Supplemental privacy statement for California residents explains Pearson's commitment to comply with California law and applies to personal information of California residents collected in connection with this site and the Services.

Sharing and Disclosure


Pearson may disclose personal information, as follows:

  • As required by law.
  • With the consent of the individual (or their parent, if the individual is a minor)
  • In response to a subpoena, court order or legal process, to the extent permitted or required by law
  • To protect the security and safety of individuals, data, assets and systems, consistent with applicable law
  • In connection the sale, joint venture or other transfer of some or all of its company or assets, subject to the provisions of this Privacy Notice
  • To investigate or address actual or suspected fraud or other illegal activities
  • To exercise its legal rights, including enforcement of the Terms of Use for this site or another contract
  • To affiliated Pearson companies and other companies and organizations who perform work for Pearson and are obligated to protect the privacy of personal information consistent with this Privacy Notice
  • To a school, organization, company or government agency, where Pearson collects or processes the personal information in a school setting or on behalf of such organization, company or government agency.

Links


This web site contains links to other sites. Please be aware that we are not responsible for the privacy practices of such other sites. We encourage our users to be aware when they leave our site and to read the privacy statements of each and every web site that collects Personal Information. This privacy statement applies solely to information collected by this web site.

Requests and Contact


Please contact us about this Privacy Notice or if you have any requests or questions relating to the privacy of your personal information.

Changes to this Privacy Notice


We may revise this Privacy Notice through an updated posting. We will identify the effective date of the revision in the posting. Often, updates are made to provide greater clarity or to comply with changes in regulatory requirements. If the updates involve material changes to the collection, protection, use or disclosure of Personal Information, Pearson will provide notice of the change through a conspicuous notice on this site or other appropriate way. Continued use of the site after the effective date of a posted revision evidences acceptance. Please contact us if you have questions or concerns about the Privacy Notice or any objection to any revisions.

Last Update: November 17, 2020