Register your product to gain access to bonus material or receive a coupon.
This eBook includes the following formats, accessible from your Account page after purchase:
EPUB The open industry format known for its reflowable content and usability on supported mobile devices.
PDF The popular standard, used most often with the free Acrobat® Reader® software.
This eBook requires no passwords or activation to read. We customize your eBook by discreetly watermarking it with your name, making it uniquely yours.
CCNP Routing and Switching Portable Command Guide
All ROUTE (300-101) and SWITCH (300-115) Commands in One Compact, Portable Resource
Preparing for the CCNP® ROUTE or CCNP SWITCH exam? Working as a network professional? Here are all the CCNP-level commands you’ll need, in one handy resource. The CCNP Routing and Switching Portable Command Guide is filled with valuable, easy-to-access information, and it’s portable enough to use whether you’re in the server room or the equipment closet.
This guide helps you memorize commands and concepts as you prepare to pass the CCNP ROUTE (300-101) or CCNP SWITCH (300-115) exams. It summarizes all CCNP certification-level Cisco IOS® Software commands, keywords, command arguments, and associated prompts, offering tips and examples for applying them in real-world environments. Throughout, configuration examples deepen your understanding of how these commands are used in actual network designs.
Whenever you’re researching routing or switching solutions, you won’t find a quicker, more useful offline resource.
--Logical “how-to” topic groupings inside the front and back covers provide one-stop research
--Compact size makes it easy to carry with you, wherever you go
--Helps you review important commands before taking the CCNP ROUTE or CCNP SWITCH certification exam
--“Create Your Own Journal” appendix with blank, lined pages enables you to personalize the book for your own needs
--“What Do You Want to Do?” chart inside front and back covers helps you to quickly reference specific tasks
Introduction xix
Part I: ROUTE
Chapter 1 Basic Network and Routing Concepts 1
Cisco Hierarchical Network Model 1
Cisco Enterprise Composite Network Model 2
Typically Used Routing Protocols 2
IGP Versus EGP Routing Protocols 3
Routing Protocol Comparison 3
Administrative Distance 3
Static Routes: permanent Keyword 4
Floating Static Routes 5
Static Routes and Recursive Lookups 5
Default Routes 6
Verifying Static Routes 6
Assigning IPv6 Addresses to Interfaces 7
Implementing RIP Next Generation (RIPng) 7
Verifying and Troubleshooting RIPng 8
Configuration Example: RIPng 9
IPv6 Ping 11
IPv6 Traceroute 12
Chapter 2 EIGRP Implementation 13
Configuring EIGRP 14
EIGRP Router ID 15
EIGRP Autosummarization 15
Passive EIGRP Interfaces 16
“Pseudo” Passive EIGRP Interfaces 17
EIGRP Timers 17
Injecting a Default Route into EIGRP: Redistribution of a Static Route 18
Injecting a Default Route into EIGRP: IP Default Network 18
Injecting a Default Route into EIGRP: Summarize to 0.0.0.0/0 19
Accepting Exterior Routing Information: default-information 20
Load Balancing: Maximum Paths 20
Load Balancing: Variance 20
Bandwidth Use 21
Stub Networks 21
EIGRP Unicast Neighbors 22
EIGRP over Frame Relay: Dynamic Mappings 23
EIGRP over Frame Relay: Static Mappings 24
EIGRP over Frame Relay: EIGRP over Multipoint Subinterfaces 25
EIGRP over Frame Relay: EIGRP over Point-to-Point Subinterfaces 26
EIGRP over MPLS: Layer 2 VPN 28
EIGRP over MPLS: Layer 3 VPN 30
EIGRPv6 31
Enabling EIGRPv6 on an Interface 31
Configuring the Percentage of Link Bandwidth Used by EIGRPv6 32
EIGRPv6 Summary Addresses 32
EIGRPv6 Timers 32
EIGRPv6 Stub Routing 32
Logging EIGRPv6 Neighbor Adjacency Changes 33
Adjusting the EIGRPv6 Metric Weights 33
EIGRP Address Families 33
Named EIGRP Configuration Modes 34
Verifying EIGRP and EIGRPv6 35
Troubleshooting EIGRP 37
Configuration Example: EIGRPv4 and EIGRPv6 using Named Address Configuration 37
Chapter 3 Implementing a Scalable Multiarea Network OSPF-Based Solution 41
OSPF Message Types 42
OSPF LSA Types 43
Configuring OSPF 44
Using Wildcard Masks with OSPF Areas 44
Configuring Multiarea OSPF 45
Loopback Interfaces 45
Router ID 46
DR/BDR Elections 46
Passive Interfaces 46
Modifying Cost Metrics 47
OSPF auto-cost reference-bandwidth 47
OSPF LSDB Overload Protection 48
Timers 48
IP MTU 49
Propagating a Default Route 49
OSPF Special Area Types 49
Stub Areas 50
Totally Stubby Areas 50
Not-So-Stubby Areas 51
Totally NSSA 51
Route Summarization 52
Interarea Route Summarization 52
External Route Summarization 52
Configuration Example: Virtual Links 52
OSPF and NBMA Networks 53
OSPF over NBMA Topology Summary 57
IPv6 and OSPFv3 57
Enabling OSPF for IPv6 on an Interface 58
OSPFv3 and Stub/NSSA Areas 58
Interarea OSPFv3 Route Summarization 59
Enabling an IPv4 Router ID for OSPFv3 59
Forcing an SPF Calculation 59
IPv6 on NBMA Networks 60
OSPFv3 Address Families 60
Verifying OSPF Configuration 61
Troubleshooting OSPF 63
Configuration Example: Single-Area OSPF 64
Configuration Example: Multiarea OSPF 65
Configuration Example: OSPF and NBMA Networks 69
Configuration Example: OSPF and Broadcast Networks 72
Configuration Example: OSPF and Point-to-Multipoint Networks 76
Configuration Example: OSPF and Point-to-Point Networks Using Subinterfaces 80
Configuration Example: IPv6 and OSPFv3 83
Configuration Example: OSPFv3 with Address Families 86
Chapter 4 Configuration of Redistribution 91
Defining Seed and Default Metrics 91
Redistributing Connected Networks 93
Redistributing Static Routes 93
Redistributing Subnets into OSPF 93
Assigning E1 or E2 Routes in OSPF 94
Redistributing OSPF Internal and External Routes 95
Configuration Example: Route Redistribution for IPv4 95
Configuration Example: Route Redistribution for IPv6 97
Verifying Route Redistribution 98
Route Filtering Using the distribute-list Command 98
Configuration Example: Inbound and Outbound Distribute List Route Filters 99
Configuration Example: Controlling Redistribution with Outbound Distribute Lists 100
Verifying Route Filters 100
Route Filtering Using Prefix Lists 101
Configuration Example: Using a Distribute List That References a Prefix List to Control Redistribution 103
Verifying Prefix Lists 104
Using Route Maps with Route Redistribution 104
Configuration Example: Route Maps 105
Manipulating Redistribution Using Route Tagging 106
Changing Administrative Distance for Internal and External Routes 108
Passive Interfaces 108
Chapter 5 Path Control Implementation 111
Verifying Cisco Express Forwarding 111
Configuring Cisco Express Forwarding 111
Path Control with Policy-Based Routing 112
Verifying Policy-Based Routing 113
Configuration Example: PBR with Route Maps 114
Cisco IOS IP Service Level Agreements 115
Step 1: Define One (or More) Probe(s) 116
Step 2: Define One (or More) Tracking Object(s) 117
Step 3a: Define the Action on the Tracking Object(s) 117
Step 3b: Define Policy Routing Using the Tracking Object(s) 117
Step 4: Verify IP SLA Operations 118
Chapter 6 Enterprise Internet Connectivity 119
Configuring a Provider Assigned Static or DHCP IPv4 Address 120
Configuring Static NAT 121
Configuring Dynamic NAT 121
Configuring NAT Overload (PAT) 122
Verifying NAT 124
NAT Virtual Interface 124
Configuration Example: NAT Virtual Interfaces and Static NAT 124
Configure Basic IPv6 Internet Connectivity 125
Configuring IPv6 ACLs 126
Verifying IPv6 ACLs 127
Configuring Redistribution of Default Routes with Different Metrics in a Dual-Homed Internet Connectivity Scenario 127
Configuring BGP 128
BGP and Loopback Addresses 129
iBGP Next-Hop Behavior 129
eBGP Multihop 130
Verifying BGP Connections 132
Troubleshooting BGP Connections 132
Default Routes 133
Attributes 134
Route Selection Decision Process 134
Weight Attribute 134
Using AS_PATH Access Lists to Manipulate the Weight Attribute 136
Using Prefix Lists and Route Maps to Manipulate the Weight Attribute 136
Local Preference Attribute 137
Using AS_PATH Access Lists with Route Maps to Manipulate the Local Preference Attribute 138
AS_PATH Attribute Prepending 139
AS_PATH: Removing Private Autonomous Systems 141
MED Attribute 142
Route Aggregation 144
Route Reflectors 145
Regular Expressions 146
Regular Expressions: Examples 146
BGP Route Filtering Using Access Lists and Distribute Lists 147
Configuration Example: Using Prefix Lists and AS_PATH Access Lists 149
BGP Peer Groups 150
MP-BGP 151
Configure MP-BGP Using Address Families to Exchange IPv4 and IPv6 Routes 151
Verifying MP-BGP 153
Chapter 7 Routers and Routing Protocol Hardening 155
Securing Cisco Routers According to Recommended Practices 156
Securing Cisco IOS Routers Checklist 156
Components of a Router Security Policy 157
Configuring Passwords 157
Password Encryption 158
Configuring SSH 159
Restricting Virtual Terminal Access 160
Securing Access to the Infrastructure Using Router ACLs 161
Configuring Secure SNMP 162
Configuration Backups 165
Implementing Logging 166
Disabling Unneeded Services 169
Configuring Network Time Protocol 169
NTP Configuration 170
NTP Design 171
Securing NTP 172
Verifying NTP 173
SNTP 174
Setting the Clock on a Router 174
Using Time Stamps 178
Configuration Example: NTP 178
Authentication of Routing Protocols 182
Authentication Options for Different Routing Protocols 182
Authentication for EIGRP 183
Authentication for OSPF 185
Authentication for BGP and BGP for IPv6 189
Part II: SWITCH
Chapter 8 Basic Concepts and Network Design 191
Hierarchical Model (Cisco Enterprise Campus Architecture) 191
Verifying Switch Content-Addressable Memory 192
Switching Database Manager Templates 192
Configuring SDM Templates 192
Verifying SDM Templates 193
LLDP (802.1AB) 194
Configuring LLDP 194
Verifying LLDP 195
Power over Ethernet 196
Configuring PoE 196
Verifying PoE 196
Chapter 9 Campus Network Architecture 197
Virtual LANs 198
Creating Static VLANs 198
Normal-Range static VLAN Configuration 198
Extended-Range static VLAN Configuration 199
Assigning Ports to Data and Voice VLANs 199
Using the range Command 200
Dynamic Trunking Protocol 200
Setting the Trunk Encapsulation and Allowed VLANs 201
Verifying VLAN Information 202
Saving VLAN Configurations 202
Erasing VLAN Configurations 203
Verifying VLAN Trunking 203
VLAN Trunking Protocol 204
Using Global Configuration Mode 204
Verifying VTP 206
Configuration Example: VLANs 206
Layer 2 Link Aggregation 209
Link Aggregation Interface Modes 210
Guidelines for Configuring Link Aggregation 210
Configuring L2 EtherChannel 211
Configuring L3 EtherChannel 211
Verifying EtherChannel 212
Configuring EtherChannel Load Balancing 212
Configuration Example: PAgP EtherChannel 213
DHCP for IPv4 216
Configuring Basic DHCP Server for IPv4 216
Configuring DHCP Manual IP Assignment for IPv4 217
Implementing DHCP Relay IPv4 217
Verifying DHCP for IPv4 218
Implementing DHCP for IPv6 218
Configuring DHCPv6 Server 219
Configuring DHCPv6 Client 219
Configuring DHCPv6 Relay Agent 220
Verifying DHCPv6 220
Chapter 10 Implementing Spanning Tree 221
Spanning-Tree Standards 222
Enabling Spanning Tree Protocol 222
Configuring the Root Switch 223
Configuring a Secondary Root Switch 224
Configuring Port Priority 224
Configuring the Path Cost 224
Configuring the Switch Priority of a VLAN 225
Configuring STP Timers 225
Verifying STP 226
Cisco STP Toolkit 226
Port Error Conditions 231
FlexLinks 231
Changing the Spanning-Tree Mode 231
Extended System ID 232
Enabling Rapid Spanning Tree 232
Enabling Multiple Spanning Tree 233
Verifying MST 235
Troubleshooting Spanning Tree 235
Configuration Example: PVST+ 235
Spanning-Tree Migration Example: PVST+ to Rapid-PVST+ 239
Chapter 11 Implementing Inter-VLAN Routing 241
Inter-VLAN Communication Using an External Router: Router-on-a-Stick 241
Inter-VLAN Routing Tips 242
Removing L2 Switch Port Capability of a Switch Port 242
Configuring SVI Autostate 243
Inter-VLAN Communication on a Multilayer Switch Through a Switch Virtual Interface 243
Configuration Example: Inter-VLAN Communication 244
Configuration Example: IPv6 Inter-VLAN Communication 251
Chapter 12 Implementing High-Availability Networks 259
Configuring IP Service Level Agreements (Catalyst 3750) 260
Configuring Authentication for IP SLA 262
Monitoring IP SLA Operations 262
Implementing Port Mirroring 262
Default SPAN and RSPAN Configuration 262
Configuring Local SPAN 263
Local SPAN Guidelines for Configuration 263
Configuring Local SPAN Example 264
Configuring Remote SPAN 267
Remote SPAN Guidelines for Configuration 267
Configuring Remote SPAN Example 268
Verifying and Troubleshooting Local and Remote SPAN 269
Switch Virtualization 269
StackWise 270
Virtual Switching System 271
Chapter 13 First-Hop Redundancy Implementation 277
First-Hop Redundancy 278
Hot Standby Router Protocol 278
Configuring Basic HSRP 278
Default HSRP Configuration Settings 279
Verifying HSRP 279
HSRP Optimization Options 279
Multiple HSRP Groups 281
HSRP IP SLA Tracking 283
HSRPv2 for IPv6 284
Debugging HSRP 285
Virtual Router Redundancy Protocol 285
Configuring VRRP 285
Interface Tracking 287
Verifying VRRP 287
Debugging VRRP 287
Gateway Load Balancing Protocol 287
Configuring GLBP 288
Interface Tracking 290
Verifying GLBP 290
Debugging GLBP 291
IPv4 Configuration Example: HSRP on L3 Switch 291
IPv4 Configuration Example: GLBP 296
IPv4 Configuration Example: VRRP on Router and L3 Switch 300
IPv6 Configuration Example: HSRP on Router and L3 Switch 304
Chapter 14 Campus Network Security 311
Switch Security Recommended Practices 312
Configuring Switch Port Security 313
Sticky MAC Addresses 313
Verifying Switch Port Security 314
Recovering Automatically from Error-Disabled Ports 315
Verifying Autorecovery of Error-Disabled Ports 315
Configuring Port Access Lists 315
Creating and Applying Named Port Access List 316
Configuring Storm Control 316
Implementing Authentication Methods 317
Local Database Authentication 317
RADIUS Authentication 318
TACACS+ Authentication 319
Configuring Authorization and Accounting 321
Configuring 802.1x Port-Based Authentication 322
Configuring DHCP Snooping 323
Verifying DHCP Snooping 324
IP Source Guard 324
Dynamic ARP Inspection 325
Verifying DAI 326
Mitigating VLAN Hopping: Best Practices 326
VLAN Access Lists 327
Verifying VACLs 329
Configuration Example: VACLs 329
Private VLANs 331
Verifying PVLANs 332
Configuration Example: PVLANs 333
Appendixes
Appendix A Private VLAN Catalyst Switch Support Matrix 337
Appendix B Create Your Own Journal Here 339
9781587144349 TOC 12/8/2014