Home > Articles

This chapter is from the book

The OpenBoot Environment

Objective: Execute basic boot PROM commands for a SPARC system.

  • Explain boot PROM fundamentals, including OpenBoot Architecture Standard, boot PROM, NVRAM, POST, Abort Sequence, and displaying POST to serial port on SPARC systems.

The hardware-level user interface that you see before the operating system starts is called the OpenBoot PROM (OBP). OpenBoot is based on an interactive command interpreter that gives you access to an extensive set of functions for hardware and software development, fault isolation, and debugging. The OBP firmware is stored in the system’s PROM chip.

Sun UltraSPARC systems use a programmable boot PROM that allows new boot program data to be loaded into the PROM by "flashing" the PROM with software. This type of PROM is called a flash PROM (FPROM).

The NVRAM chip stores user-definable system parameters, also referred to as NVRAM variables or EEPROM parameters. The parameters allow administrators to control variables such as the default boot device and boot command. The NVRAM also contains writeable areas for user-controlled diagnostics, macros, and device aliases. NVRAM is where the system identification information is stored, such as the host ID, Ethernet address, and time-of-day (TOD) clock. On older systems, a single lithium battery backup provides backup for the NVRAM and clock. Newer systems contain a non-removable Serial Electronically Erasable Programmable Read-Only Memory (SEEPROM) chip that does not require a battery. Other newer systems may contain a removable system configuration card to hold the system configuration information. Many software packages use the host ID for licensing purposes; therefore, it is important that the NVRAM chip can be removed and placed into any replacement system board. Because NVRAM contains unique identification information for the machine, Sun sometimes refers to it as the identification programmable read-only memory (ID PROM).

OpenBoot is currently at version 5 but is available only on high-end Sun servers (SunFire and higher). Depending on the age of your system, you could have PROM version 3, 4, or 5 installed. The original boot PROM firmware, version 1, was first introduced on the Sun SPARCstation 1. The first version of the OpenBoot PROM was version 2, and it first appeared on the SPARCstation 2 system. OpenBoot versions 3 and 4 are the versions that are currently available on the Ultra series systems and Enterprise servers. Versions 3, 4 and 5 of the OpenBoot architecture provide a significant increase in functionality over the boot PROMs in earlier Sun systems. One notable feature of the OpenBoot firmware is a programmable user interface based on the interactive programming language Forth. In Forth, sequences of user commands can be combined to form complete programs. This capability provides a powerful tool for debugging hardware and software. Another benefit of versions 3, 4, and 5 is the Flash update feature. You can update the version 3, 4, and 5 firmware without replacing the PROM chip, but you will not be tested on updating the firmware on the exam.

To determine the version of the OpenBoot PROM, type

/usr/bin/prtdiag -v

or

prtconf -v 

Entry-Level to High-End Systems

Every Sun workstation and server except the midrange, midframe, and high-end servers has only one system board and holds only one boot PROM and NVRAM chip.

Sun’s midrange, midframe, and high-end servers, such as the Enterprise and Sun Fire, can be configured with multiple CPU/memory and I/O boards.

The following are some things you should be aware of on multiple-CPU systems:

  • A multiple-CPU system has a clock board to oversee the backplane communications.
  • The host ID and Ethernet address are on the clock board and are automatically downloaded to the NVRAM on all CPU boards when the POST is complete.
  • PROM contents on each CPU are compared and verified via checksums.
  • The CPU that is located in the lowermost card cage slot is the master CPU board.
  • Each CPU runs its own individual POST.
  • If these systems are configured with redundant CPU/memory and I/O boards, they can run in a degraded yet stable mode, even when some components have failed. Such systems are usually described as fault-tolerant or fault-resilient.

Accessing the OpenBoot Environment

You can get to the OpenBoot environment by using any of the following methods:

  • Halting the operating system.
  • Pressing the Stop and A keys simultaneously (Stop+A). On terminals that are connected to the serial port and do not have a Stop key, you press the Break key. This will stop the operating system and transfer control to the OpenBoot monitor. In some cases, this may lead to data loss or corruption, and therefore should be used with caution.
  • When the system is initially powered on. If your system is not configured to start up automatically, it stops at the user interface (the monitor prompt). If automatic startup is configured, you can make the system stop at the user interface by pressing Stop+A after the display console banner is displayed but before the system begins starting the operating system.
  • When the system hardware detects an error from which it cannot recover. (This is known as a watchdog reset.)

System Control Switch

On those servers with a power button and system control switch located on the system’s front panel, the ability to turn the system on or off is controlled by the key position on the system control switch.

The four-position system control switch (key) located on the system’s front panel controls the power-on modes of the system and prevents unauthorized users from powering off the system or reprogramming system firmware. Table 3.1 describes the function of each system control switch setting:

Table 3.1 Function of Each System Control Switch Setting

Position

Description

Normal

This key position allows the system Power button to power the system on or off. If the operating system is running, pressing and releasing the Power button initiates a graceful software system shutdown. Pressing and holding the Power button in for five seconds causes an immediate hardware power off. which could cause disk corruption and loss of data—this should be used only as last resort.

Locked

This key position disables the system Power button to prevent unauthorized users from powering the system on or off. It also disables the keyboard L1-A (Stop-A) command, terminal Break key command, and ~# tip window command, preventing users from suspending system operation to access the system ok prompt. The Locked setting, used for normal day-to-day operations, also prevents unauthorized programming of the system boot PROM.

Diagnostics

This key position forces the power-on self-test (POST) and OpenBoot Diagnostics software to run during system startup and system resets. The Power button functions the same as when the system control switch is in the Normal position.

Forced Off

This key position forces the system to power off immediately and to enter 5-volt standby mode. It also disables the system Power button. Use this setting when AC power is interrupted and you do not want the system to restart automatically when power is restored. With the system control switch in any other position, if the system were running prior to losing power, it restarts automatically once power is restored.

The Forced Off setting also prevents a Remote System Control (RSC) session from restarting the system. However, the RSC card continues to operate using the system’s 5-volt standby power.

OpenBoot Firmware Tasks

The IEEE Standard 1275 defines the OpenBoot architecture and the primary tasks of the OpenBoot firmware are as follows:

  • Test and initialize the system hardware.
  • Determine the hardware configuration.
  • Start the operating system from either a mass storage device or a network.
  • Provide interactive debugging facilities for configuring, testing, and debugging.
  • Allow modification and management of system startup configuration, such as NVRAM parameters.
  • Servers such as the Sun Fire provide environmental monitoring and control capabilities at both the operating system level and the OpenBoot firmware level to monitor the state of the system power supplies, fans, and temperature sensors. If it detects any voltage, current, fan speed, or temperature irregularities, the monitor generates a warning message to the system console and ultimately it will initiate an automatic system shutdown sequence.

Specifically, the following tasks are necessary to initialize the operating system kernel:

  1. OpenBoot displays system identification information and then runs self-test diagnostics to verify the system’s hardware and memory. These checks are known as a POST—power-on self test.
  2. OpenBoot will then probe system bus devices, interpret their drivers, build a device tree, and then install the console. After initializing the system, OpenBoot displays a banner on the console.
  3. OpenBoot will check parameters stored in NVRAM to determine how to boot the operating system.
  4. OpenBoot loads the primary startup program, bootblk, from the default startup device.
  5. The bootblk program finds and executes the secondary startup program, ufsboot, and loads it into memory. The ufsboot program loads the operating system kernel.

Pearson IT Certification Promotional Mailings & Special Offers

I would like to receive exclusive offers and hear about products from Pearson IT Certification and its family of brands. I can unsubscribe at any time.

Overview


Pearson Education, Inc., 221 River Street, Hoboken, New Jersey 07030, (Pearson) presents this site to provide information about Pearson IT Certification products and services that can be purchased through this site.

This privacy notice provides an overview of our commitment to privacy and describes how we collect, protect, use and share personal information collected through this site. Please note that other Pearson websites and online products and services have their own separate privacy policies.

Collection and Use of Information


To conduct business and deliver products and services, Pearson collects and uses personal information in several ways in connection with this site, including:

Questions and Inquiries

For inquiries and questions, we collect the inquiry or question, together with name, contact details (email address, phone number and mailing address) and any other additional information voluntarily submitted to us through a Contact Us form or an email. We use this information to address the inquiry and respond to the question.

Online Store

For orders and purchases placed through our online store on this site, we collect order details, name, institution name and address (if applicable), email address, phone number, shipping and billing addresses, credit/debit card information, shipping options and any instructions. We use this information to complete transactions, fulfill orders, communicate with individuals placing orders or visiting the online store, and for related purposes.

Surveys

Pearson may offer opportunities to provide feedback or participate in surveys, including surveys evaluating Pearson products, services or sites. Participation is voluntary. Pearson collects information requested in the survey questions and uses the information to evaluate, support, maintain and improve products, services or sites; develop new products and services; conduct educational research; and for other purposes specified in the survey.

Contests and Drawings

Occasionally, we may sponsor a contest or drawing. Participation is optional. Pearson collects name, contact information and other information specified on the entry form for the contest or drawing to conduct the contest or drawing. Pearson may collect additional personal information from the winners of a contest or drawing in order to award the prize and for tax reporting purposes, as required by law.

Newsletters

If you have elected to receive email newsletters or promotional mailings and special offers but want to unsubscribe, simply email information@informit.com.

Service Announcements

On rare occasions it is necessary to send out a strictly service related announcement. For instance, if our service is temporarily suspended for maintenance we might send users an email. Generally, users may not opt-out of these communications, though they can deactivate their account information. However, these communications are not promotional in nature.

Customer Service

We communicate with users on a regular basis to provide requested services and in regard to issues relating to their account we reply via email or phone in accordance with the users' wishes when a user submits their information through our Contact Us form.

Other Collection and Use of Information


Application and System Logs

Pearson automatically collects log data to help ensure the delivery, availability and security of this site. Log data may include technical information about how a user or visitor connected to this site, such as browser type, type of computer/device, operating system, internet service provider and IP address. We use this information for support purposes and to monitor the health of the site, identify problems, improve service, detect unauthorized access and fraudulent activity, prevent and respond to security incidents and appropriately scale computing resources.

Web Analytics

Pearson may use third party web trend analytical services, including Google Analytics, to collect visitor information, such as IP addresses, browser types, referring pages, pages visited and time spent on a particular site. While these analytical services collect and report information on an anonymous basis, they may use cookies to gather web trend information. The information gathered may enable Pearson (but not the third party web trend services) to link information with application and system log data. Pearson uses this information for system administration and to identify problems, improve service, detect unauthorized access and fraudulent activity, prevent and respond to security incidents, appropriately scale computing resources and otherwise support and deliver this site and its services.

Cookies and Related Technologies

This site uses cookies and similar technologies to personalize content, measure traffic patterns, control security, track use and access of information on this site, and provide interest-based messages and advertising. Users can manage and block the use of cookies through their browser. Disabling or blocking certain cookies may limit the functionality of this site.

Do Not Track

This site currently does not respond to Do Not Track signals.

Security


Pearson uses appropriate physical, administrative and technical security measures to protect personal information from unauthorized access, use and disclosure.

Children


This site is not directed to children under the age of 13.

Marketing


Pearson may send or direct marketing communications to users, provided that

  • Pearson will not use personal information collected or processed as a K-12 school service provider for the purpose of directed or targeted advertising.
  • Such marketing is consistent with applicable law and Pearson's legal obligations.
  • Pearson will not knowingly direct or send marketing communications to an individual who has expressed a preference not to receive marketing.
  • Where required by applicable law, express or implied consent to marketing exists and has not been withdrawn.

Pearson may provide personal information to a third party service provider on a restricted basis to provide marketing solely on behalf of Pearson or an affiliate or customer for whom Pearson is a service provider. Marketing preferences may be changed at any time.

Correcting/Updating Personal Information


If a user's personally identifiable information changes (such as your postal address or email address), we provide a way to correct or update that user's personal data provided to us. This can be done on the Account page. If a user no longer desires our service and desires to delete his or her account, please contact us at customer-service@informit.com and we will process the deletion of a user's account.

Choice/Opt-out


Users can always make an informed choice as to whether they should proceed with certain services offered by Adobe Press. If you choose to remove yourself from our mailing list(s) simply visit the following page and uncheck any communication you no longer want to receive: www.pearsonitcertification.com/u.aspx.

Sale of Personal Information


Pearson does not rent or sell personal information in exchange for any payment of money.

While Pearson does not sell personal information, as defined in Nevada law, Nevada residents may email a request for no sale of their personal information to NevadaDesignatedRequest@pearson.com.

Supplemental Privacy Statement for California Residents


California residents should read our Supplemental privacy statement for California residents in conjunction with this Privacy Notice. The Supplemental privacy statement for California residents explains Pearson's commitment to comply with California law and applies to personal information of California residents collected in connection with this site and the Services.

Sharing and Disclosure


Pearson may disclose personal information, as follows:

  • As required by law.
  • With the consent of the individual (or their parent, if the individual is a minor)
  • In response to a subpoena, court order or legal process, to the extent permitted or required by law
  • To protect the security and safety of individuals, data, assets and systems, consistent with applicable law
  • In connection the sale, joint venture or other transfer of some or all of its company or assets, subject to the provisions of this Privacy Notice
  • To investigate or address actual or suspected fraud or other illegal activities
  • To exercise its legal rights, including enforcement of the Terms of Use for this site or another contract
  • To affiliated Pearson companies and other companies and organizations who perform work for Pearson and are obligated to protect the privacy of personal information consistent with this Privacy Notice
  • To a school, organization, company or government agency, where Pearson collects or processes the personal information in a school setting or on behalf of such organization, company or government agency.

Links


This web site contains links to other sites. Please be aware that we are not responsible for the privacy practices of such other sites. We encourage our users to be aware when they leave our site and to read the privacy statements of each and every web site that collects Personal Information. This privacy statement applies solely to information collected by this web site.

Requests and Contact


Please contact us about this Privacy Notice or if you have any requests or questions relating to the privacy of your personal information.

Changes to this Privacy Notice


We may revise this Privacy Notice through an updated posting. We will identify the effective date of the revision in the posting. Often, updates are made to provide greater clarity or to comply with changes in regulatory requirements. If the updates involve material changes to the collection, protection, use or disclosure of Personal Information, Pearson will provide notice of the change through a conspicuous notice on this site or other appropriate way. Continued use of the site after the effective date of a posted revision evidences acceptance. Please contact us if you have questions or concerns about the Privacy Notice or any objection to any revisions.

Last Update: November 17, 2020