The Basic Uses of TCP/IP Route Maps

This chapter is from the book

Routing TCP/IP, Volume 1, 2nd Edition

Learn More Buy

This chapter is from the book

This chapter is from the book 

Routing TCP/IP, Volume 1, 2nd Edition

Learn More Buy

Troubleshooting Exercise

1. Given the following configuration:

            interface TokenRingl
   
            ip address 192.168.15.254 255.255.255.0
   
            ip policy route-map Ex1
   
            !
   
            access-list 1 permit 192.168.0.0 0.0.255.255
   
            access-list 101 permit host 192.168.10.5 any eq telnet
   
            !
   
            route-map Ex1 permit 5
   
            match ip address 1
   
            set ip next-hop 192.168.16.254
   
            !
   
            route-map Ex1 permit 10
   
            match ip address 101
   
            set ip next-hop 192.168.17.254
         

   The intention is to policy route all packets whose source address prefix is 192.168.0.0 to 192.168.255.255. The exception is that packets originating from the Telnet port of host 192.168.10.5 should be forwarded to 192.168.17.254. There are two errors in this configuration that are preventing the policy route from working correctly. What are they?