Home > Articles > Cisco > CCNA Routing and Switching

  • Print
  • + Share This
This chapter is from the book

Configuration Example: Static Routes

Figure 6-1 shows the network topology for the configuration that follows, which shows how to configure static routes using the commands covered in this chapter.

Figure 1

Figure 6-1 Network Topology for Static Route Configuration

Boston Router

Boston>en

 

Boston#config t

 

Boston(config)#ip route 172.16.30.0 255.255.255.0 172.16.20.2

Configures a static route using the next-hop address

Boston(config)#ip route 172.16.40.0 255.255.255.0 172.16.20.2

 

Boston(config)#ip route 172.16.50.0 255.255.255.0 172.16.20.2

 

Boston(config)#exit

 

Boston#copy run start

 

Buffalo Router

Buffalo>en

 

Buffalo#config t

 

Buffalo(config)#ip route 172.16.10.0 255.255.255.0 s1

Configures a static route using the exit interface

Buffalo(config)#ip route 172.16.50.0 255.255.255.0 s0

 

Boston(config)#exit

 

Boston#copy run start

 

Bangor Router

Bangor>en

 

Bangor#config t

 

Bangor(config)#ip route 0.0.0.0 0.0.0.0 s1

Configures a static route using the default route

Bangor(config)#exit

 

Bangor#copy run start

 

  • + Share This
  • 🔖 Save To Your Account