Home > Articles > Cisco > CCNA Routing and Switching

  • Print
  • + Share This
This chapter is from the book

Summary

This chapter discussed how VLANs operate to provide more effective networks by controlling broadcasts in your network. To configure VLANs on a Catalyst switch, you must first configure VTP to administer VLANs. Therefore, you learned how VTP operates and how it is configured. You also learned how to create a trunk link to carry all VLAN traffic, and how to configure a VLAN. Finally, this chapter discussed the verification of Spanning Tree operations, including the following:

  • How VLANs operate

  • How to configure VTP

  • How to configure a trunk

  • How to configure a VLAN

  • How to verify Spanning Tree operations

  • + Share This
  • 🔖 Save To Your Account